Amorphous roll shear strip
product description
Amorphous alloy is a new type of energy-saving material. It is made of molten metal that is rapidly cooled at a rate of about one million degrees per second. During this process, the molten metal forms an amorphous thin strip with a liquid-like principle structure inside. It is completely different from the crystal structure of silicon steel, and has high magnetic permeability and low high-frequency loss. At the same time, the production process of amorphous alloy strips is short, and the emission of harmful gases such as CO, SO2, NOX, etc. is effectively reduced during the production process. It is a bidirectional energy-saving product and is known as a revolutionary progress in the metallurgical process.
Amorphous roll shearing strip is based on customer requirements, without changing the properties of the strip, and cutting the amorphous master tape roll to a corresponding width suitable for customer needs to meet the needs of customers' own products.
Material properties | |
Material grade (GB / T15019-2003) | 1K101 / 101S / SA1 |
Saturation magnetic induction intensity (T) | 1.56 |
Strip thickness (μm) | 20 ~ 32 |
Saturation magnetostriction coefficient | 27 * 10-6 |
Density (g / cm3） | 7.18 |
Curie temperature (℃) | 415 |
Crystallization temperature (℃) | 530 |
Tensile strength (MPa) | 1715 |
Modulus of elasticity (GPa) | 131 |
Vickers hardness (HV) | 986 |
Coefficient of thermal expansion (ppm / ℃), 25 ~ 300 ℃ | 6.9 |
Strip category | Product Family Code | Strip width | Strip thickness |
mm | μm | ||
Roll shear strip | RA0202MG- | 5 | 25 |
6.5 | 25 | ||
8 | 25 | ||
10 | 25 | ||
12 | 25 | ||
15 | 25 | ||
20 | 25 | ||
25 | 25 | ||
30 | 25 | ||
35 | 25 | ||
40 | 25 | ||
45 | 25 | ||
50 | 25 | ||
55 | 25 | ||
60 | 25 | ||
80 | 25 |